| 43 | 0 | 144 |
| 下载次数 | 被引频次 | 阅读次数 |
本研究针对某高铁4号梁场的噪声影响进行了分析,结合声学仿真与现场实测,评估了梁场作业对周围环境的噪声影响,并提出了有效的降噪措施。研究确定了梁场内的主要噪声源为制梁台座和钢筋加工生产线,使用Cadna/A软件建立了声学模型,并对不同噪声源和工况进行了模拟计算。根据计算结果,提出了包括梁场布局优化、双层存梁台座的遮蔽效应、钢筋加工生产线降噪和声屏障设置在内的降噪措施。研究表明,存梁台座满布且双层存梁时,居民楼一栋和二栋的声压级可降低超过10 dB(A),学校的声压级降低约7 dB(A)。钢筋加工生产线降噪10 dB(A)时,居民楼声压级平均降低2.6 dB(A)。此外,设置声屏障可有效减小梁场噪声传播,最大可降低预测点噪声11.2 dB(A),使大部分预测点满足规范要求。
Abstract:In this study, the noise influence of No.4 beam field of a high-speed railway was analyzed. Combined with acoustic simulation and field measurement, the noise influence of beam field operation on the surrounding environment was evaluated, and effective noise reduction measures were proposed. The main noise sources in the beam field were determined to be the beam-making pedestal and the rebar processing workshop. The acoustic model was established using Cadna/A software, and different noise sources and working conditions were simulated. According to the calculation results, noise reduction measures including beam field layout optimization, shielding effect of double-layer beam storage pedestal, noise reduction of rebar production line and noise barrier setting are proposed. The results show that the sound pressure level of the first and second buildings of the residential building can be reduced by more than 10 dB(A), and the sound pressure level of the school can be reduced by about 7 dB(A). When the noise reduction of the steel bar production line is 10 dB(A), the sound pressure level of the residential building is reduced by 2.6 dB(A) on average. In addition, the noise barrier can effectively reduce the noise propagation of the beam field, and the noise of the prediction point can be reduced by 11.2 dB (A) at most, so that most of the prediction points meet the requirements of the specification.
[1] 孙玉兰. 客运专线梁场设置方案综合性分析[J]. 铁道建筑, 2014(4): 44-47. (SUN Yulan. Comprehensive analysis on arrangement scheme of girder fabrication and store yard for passenger-dedicated railway [J]. Railway Engineering, 2014(4): 44-47. in Chinese)
[2] 张少朋, 牛远志, 黄轶淼, 等. 基于BIM的铁路预制箱梁钢筋设计加工一体化研究[J]. 中国铁路, 2024(2): 55-61. (ZHANG Shaopeng, NIU Yuanzhi, HUANG Yimiao, et al. Research on Integrated Steel Bar Design and Processing for BIM-based Railway Prefabricated Box Girder[J]. China Railway, 2024(2): 55-61. in Chinese)
[3] 李明, 王玉龙, 刘颖. 基于仿真技术的高铁梁场生产效率及资源配置研究[J]. 铁道标准设计, 2023, 67(2): 60-66. (LI Ming, WANG Yulong, LIU Ying. Research on Production Efficiency and Resource Allocation of High-speed Railway Prefabricated Beam Plant Based on Simulation Technology[J]. Railway Standard Design, 2023, 67(2): 60-66. in Chinese)
[4] 周景升, 赵光. BIM在高铁梁场临建过程中的应用[J]. 智能城市, 2024, 10(2): 101-103. (ZHOU Jing-sheng, ZHAO Guang. Application of BIM in the temporary construction process of high-speed rail beam yard[J]. Intelligent City, 2024, 10(2): 101-103. in Chinese)
[5] 王治斌, 王清明. 客运专线铁路箱梁预制场优化设计与设备配套[J]. 中国工程科学, 2009, 11(1): 67-74. (WANG Zhibin, WANG Qingming. Optimization design and equipment matching of box girder prefabrication yard for passenger dedicated railway line [J]. Strategic Study of CAE, 2009, 11(1): 67-74. in Chinese)
[6] 邵艳令. 梁场噪声监测实例[J]. 科技创新导报, 2010, (29): 229. (SHAO Yanling. An example of beam field noise monitoring[J]. Science and Technology Innovation Herald, 2010, (29): 229. in Chinese)
[7] 国家环保总局. 关于德国Cadna/A环境噪声模拟软件系统鉴定意见[Z]. 北京: 国家环保总局. 2001. (State Environmental Protection Administration. Opinions on identification of German Cadna/A environmental noise simulation software system [Z]. Beijing: State Environmental Protection Administration. 2001. in Chinese)
[8] 杨忠平. 基于Cadna/A的高速铁路单侧高层住宅声屏障降噪效果研究[J]. 铁道标准设计, 2020, 64(10): 153-156. (YANG Zhongping. Study on noise reduction effect of high-speed railway unilateral high-rise residential noise barrier based on Cadna/A[J]. Railway Standard Design, 2020, 64(10): 153-156. in Chinese)
[9] DataKustik, Cadna/A Manual Version3.6[M]. Germany: DataKustik, 2006.
[10] 阮学云, 张馨月, 魏浩征, 等. 燃煤发电厂锅炉岛的噪声治理研究[J]. 噪声与振动控制, 2023, 43(6): 208-215+252. (RUAN Xueyun, ZHANG Xinyue, WEI Haozheng, et al. Study on noise control of the boiler island in a coal-fired power plant[J]. Noise and Vibration Control, 2023, 43(6): 208-215+252. in Chinese)
[11] 过春燕, 卢向明. 德国Cadna/A环境噪声模拟软件在公路交通噪声预测中的应用[J]. 商丘职业技术学院学报, 2002(3): 12-16. (GUO Chunyan, LU Xiangming. Application of German Cadna/A environmental noise simulation software in highway traffic noise prediction[J]. Journal of Shangqiu Vocational and Technical, 2002(3): 12-16. in Chinese)
[12] WANG Yafei, CHEN Zhengqing, YANG Chao, et al. A novel eddy current damper system for multi-mode high-order vibration control of ultra-long stay cables[J]. Engineering Structures, 2022, 262: 114319.
[13] 樊伟, 郑联语, 赵雄, 等. 基于新型电涡流阻尼器的大飞机垂尾装配界面精加工振动抑制[J]. 航空学报, 2019, 40(9): 340-356. (FAN Wei, ZHENG Lianyu, ZHAO Xiong, et al. Vibration attenuation for finishing assembly interfaces of vertical tail section of large aircraft based on novel eddy current damper[J]. Acta Aeronautica et Astronautica Sinica, 2019, 40(9): 340-356. in Chinese)
[14] 娄金秀, 马建华. 基于Cadna/A的高层建筑环境噪声垂直分布仿真[J]. 噪声与振动控制, 2014, 34(3): 136-138, 181. (LOU Jinxiu, MA Jianhua. Simulation of vertical distribution of ambient noise in high-rise buildings based on Cadna/A[J]. Noise and Vibration Control, 2014, 34(3): 136-138, 181. in Chinese)
基本信息:
中图分类号:U238
引用信息:
[1]胡才,王如川,胡在刚,等.基于降噪需求的高铁梁场优化布置方案研究[J].铁道建筑().
基金信息:
中铁大桥局集团有限公司科学技术研究与开发项目(2025-57-引导); 四川省科技计划(2025ZNSFSC0411)
2026-07-16
2026-07-16
2026-07-16