nav emailalert searchbtn searchbox tablepage yinyongbenwen piczone journalimg journalInfo journalinfonormal searchdiv searchzone qikanlogo popupnotification paper paperNew
多通道公铁混层箱桁组合梁斜拉桥主梁设计
基金项目(Foundation): 中国铁建股份有限公司科技研发重大专项(2023-A01)
邮箱(Email):
DOI:
发布时间: 2026-09-14
出版时间: 2026-09-14
网络发布时间: 2026-09-14
移动端阅读
摘要:

昌九高铁(南昌—九江)扬子洲赣江公铁大桥西支主桥为主跨320 m的竖琴形索面斜拉桥,采用公铁混层合建方案,上层为8车道城市快速路,下层为双线时速350 km高速铁路与4车道城市主干道。经方案比选,确定关键技术和施工方案。主梁采用上下带挑臂的板桁-箱桁组合断面,N形桁式,上弦杆为箱形截面,腹杆为王形或箱形截面;上层桥面为正交异性钢桥面板,下层公铁平层为整体钢箱,索梁锚固采用钢锚箱。主梁采用栓焊结合节段、边跨顶推与中跨悬臂拼装相结合的施工方案,并创新性提出“错层运输、整体提升、分层安装”的架设工艺。有限元验算表明,结构的强度、刚度、稳定性、抗疲劳性等各项力学性能以及抗风抗震性能、列车通行的安全与舒适指标均满足规范要求。

Abstract:

The west-branch main bridge of the Yangzizhou Ganjiang Road–Rail Bridge on the Nanchang–Jiujiang High-speed Railway is a harp-type cable-stayed bridge with a main span of 320 m. It adopts a combined road–rail construction scheme with mixed-level decks: the upper deck carries an 8-lane urban expressway, while the lower deck accommodates a double-track high-speed railway designed for 350 km/h together with a 4-lane urban arterial road. Key technical schemes and construction methods were determined through scheme comparison and selection. The main girder adopts a plate-truss and box-truss composite cross-section with cantilevered arms on both the upper and lower decks, in an N-shaped (Warren) truss configuration, in which the top chords are box sections and the web members are H-shaped or box sections. The upper deck consists of an orthotropic steel deck plate, the lower road–rail deck is a monolithic steel box, and cable-to-girder anchorage is realized by means of steel anchor boxes. The main girder is erected through a combination of bolted-and-welded hybrid segments, incremental launching of the side spans, and cantilever assembly of the central span, with an innovative erection technique of "staggered-level transportation, integral lifting, and layered installation". Finite element verification shows that the structural strength, stiffness, stability, and fatigue resistance, as well as the wind- and seismic-resistance performance and the safety and comfort indices for train passage, all satisfy the requirements of the relevant codes.

参考文献

[1] 中铁第四勘察设计院集团有限公司.南昌扬子洲赣江公铁大桥施工图设计[Z].武汉,2022

[2] 郭建光,郭安娜,严爱国,等.昌九高铁隆兴大桥总体设计[J].桥梁建设,2025,55(4):117-125.

[3] 李秋,刘新华,冯鹏程,等.湖北观音寺长江大桥主桥纵向约束体系研究[J].桥梁建设,2026,56(1):9-16.

[4] 郭安娜, 王新国, 崔苗苗, 等. 公铁混合布置大跨度斜拉桥主梁断面形式研究——以赣江公铁大桥西支主桥设计为例[J]. 铁道标准设计, 2024, 68(1): 96-101.

[5] 艾宗良, 陈克坚, 鄢勇, 等. 新白沙沱长江六线特大桥桥面布置方案研究[J]. 铁道工程学报, 2015, 32(4): 65-70.

[6] 谢兰博, 康晋, 刘汉顺. 杭州市彭埠大桥主桥钢梁设计[J]. 桥梁建设, 2023, 53(4): 116-122.

[7] 刘爱林, 钟亮, 赵泽华. 商合杭高铁芜湖长江公铁大桥箱桁组合梁立体试拼装工艺[J]. 中国铁路, 2020(6): 26-30.

[8] 焦亚萌,简方梁,张世基,等.公铁合建钢桁结合梁混凝土桥面板横向分析研究[J].铁道标准设计,2021,65(11):17-21.

[9] 祝兵,张子怡,张振,等.大跨度斜拉桥钢锚梁空间复杂力学性能研究[J].铁道标准设计,2022,66(3):95-99.

[10] 周君, 张延河, 周成穗. 公铁混层共建多通道钢桁梁架设施工关键技术[J]. 铁道建筑, 2024, 64(12): 76-81.

[11]邹敏勇,易伦雄,吴国强.商合杭铁路芜湖长江公铁大桥主桥钢梁设计[J].桥梁建设,2019,49(1):65-70.

[12]吴建贤.公铁混层布置双层箱桁组合梁建造技术[J].土木工程与管理学报,2024,41(4):63-68.

基本信息:

中图分类号:U448.27

引用信息:

[1]郭安娜.多通道公铁混层箱桁组合梁斜拉桥主梁设计[J].铁道建筑().

基金信息:

中国铁建股份有限公司科技研发重大专项(2023-A01)

发布时间:

2026-09-14

出版时间:

2026-09-14

网络发布时间:

2026-09-14

检 索 高级检索

引用

GB/T 7714-2015 格式引文
MLA格式引文
APA格式引文