| 28 | 0 | 154 |
| 下载次数 | 被引频次 | 阅读次数 |
针对重载铁路、高速铁路无缝线路在小半径曲线等特殊地段道床横向阻力不足的问题,采用现场原位测试方法,对比分析了标准IIIc混凝土轨枕与安装枕端挡板的轨枕在不同道床砟肩宽度及堆高条件下的横向阻力特性。结果表明:道床横向阻力随轨枕横向位移呈现非线性增长趋势;安装枕端挡板可显著提升道床横向阻力,在相同道床断面下较标准IIIc轨枕增强了49.4%~57.9%;单纯采用砟肩加宽至600 mm或砟肩堆高增至150 mm的传统措施,道床横向阻力分别提升7.2%和20.9%,而在标准工况下安装挡板可使道床横向阻力增加4.00 kN,提升幅度为49.4%,增强效果更为显著;砟肩宽度500 mm且无堆高的极限优化工况下,带挡板轨枕的道床横向阻力为8.72 kN,大于重载铁路小半径曲线上砟肩加宽100 mm后的道床横向阻力(8.67 kN)。枕端挡板能有效替代单纯增加道床几何尺寸的传统措施,在保证线路稳定性的前提下通过优化道床断面减少道砟用量,适用于既有线改造及高速铁路飞砟防治。
Abstract:To address the issue of insufficient lateral resistance in special areas, such as small radius curves, of heavy-haul and high-speed lines, in-situ field tests were conducted. This study investigates the lateral resistance characteristics of standard Type IIIc sleepers and sleepers equipped with sleeper end anchors under different ballast shoulder widths and heights. The results indicate that the lateral resistance exhibits a non-linear increase trend with the sleeper lateral displacement. The installation of sleeper anchors significantly improves lateral resistance, achieving an increase of 49.4% to 57.9% compared to standard Type IIIc sleepers under identical ballast conditions. Compared to the traditional measures of widening the ballast shoulder by 100 mm (which yields a 7.2% resistance increase) or increasing the shoulder height by 50 mm (a 20.9% increase), the installation of anchors in standard conditions can significantly increase the lateral resistance by 4.00 kN, achieving a remarkable improvement of 49.4%. Furthermore, under the extreme optimized condition of a 500 mm shoulder width with zero height, the lateral resistance of sleepers with anchors (8.72 kN) remains superior to that of the ballast bed with a 100 mm widened shoulder on small radius curves of heavy-haul railways (8.67 kN). This equipment serves as an effective alternative to the traditional measure of merely increasing ballast bed geometric dimensions. It allows for reduced ballast consumption through ballast bed optimization while ensuring track stability, making it suitable for the retrofitting of existing lines and the prevention of ballast flight on high-speed railways.
[1]井国庆.铁路有砟道床[M].北京:中国铁道出版社,2012:196-199.
[2]高原,司道林.考虑实测横向矢度与道床阻力的小半径曲线无缝线路稳定性分析[J].铁道建筑,2025,65(12):42-47.
[3]强伟乐,程岩,林猛猛,等.轨枕底部凹形花纹对道床横向阻力影响研究[J].铁道工程学报,2025,42(5):38-42.
[4]井国庆,付豪.有砟道床横向阻力[M].北京:中国铁道出版社,2021:166-211.
[5]郭云龙,王新雨,廉栋,等.摩擦型轨枕道床的横向阻力研究[J].西南交通大学学报,2022,57(2):301-305.
[6]Esmaeili M, Khodaverdian A, Neyestanaki H K, et al. Investigating the effect of nailed sleepers on increasing the lateral resistance of ballasted track[J]. Computers and Geotechnics,2016,71:1-11.
[7]高亮,罗奇,徐旸,等.道床断面尺寸对道床横向阻力的影响[J].西南交通大学学报,2014,49(6):954-960.
[8]井国庆,王子杰,林建.基于力学平衡原理飞砟机理与防治研究[J].铁道科学与工程学报,2014,11(6):96-101.
基本信息:
中图分类号:U213.71
引用信息:
[1]张冰冰,汪明哲,罗旭,等.枕端挡板对道床横向阻力的影响[J].铁道建筑().
2026-06-23
2026-06-23
2026-06-23